Output: 420mW (out of the front).
2 degree beam spread, over 1.5 inches coverage
Cures windshield repair resin in less than 50 sec.
Current Regulated. Runs 1.5 hrs.
Comes with 2 Lithium CR123 batteries.
Side switch selects between high and low.
Glass lens.
Optional UV-pass glass lens for low white light applications.
Optional Forward Clicky Tailcap.
Optional Slim UV-365 LED (210mW output), note: If you applications requires the light be on continuously for more than 2 minutes, an additional heat sink such as the standard C-mount adapotr is required.

Tab View Script

Specification More Pictures Accessories Technical notes

CR123 8W UV365 Datasheet

AS-LED Technology allows us to achieve the best heat dissipation

UV warning

Headset Attachment
Forward Clicky Tailcap
Glass lens & Lens ring
Side Magnetic Pad & Bracket for suction cup mounting

Please see links to accessories and parts below

Our UV-365 LED lights will not degrade since we use glass lens.
Other UV lights that are built with multiple T-13/4 epoxy-encapsulated UV LED lamps will degrade 50% after 500 hours because the epoxy encapsulation turns yellow after exposed to the UV light.

Our UV-365 LED lights will not have significant wavelength shift even at high current of 1200mA because the LED chip is direclty alloyed onto the copper base and the heat generated from the chip is efficiently drained.
Other epoxy-encapsulated UV LED light will shift to a much longer wavelength (the high the current, the longer the wavelength) after being on for a few seconds because heat generated from the LED chip becomes trapped, and the temperature of the LED chip will rise to over 125 degree C in only a few seconds.